Waste Water Treatment

SFA Plus-Z5 & Z5S (H2S): Mostly aiming at odors neutralization and gases reduction such as: H2S, ammonia, mercaptans.  Mixed, vaporized or injected to waste water streams. Can be injected at waste water entrance in pump stations, water falls or elsewhere such as lagoons, ponds, etc.

SFA Plus-WF5 & SFA Plus-WF5S: Mostly aiming at odors neutralization and gases reduction such as: Hydrogen sulfide, ammonia, mercaptans. These are solution active chemistries incorporating surfactants to permit the actives ingredients to enter and stay in solution in the waste water neutralizing odors and gases into the water phase. These formulas has exhibited sludge’s penetration and mobilizing capabilities in some systems promoting cleaning of systems tanks and piping.
.

SF-WF, SF-WF5 (H2S): Mostly aiming at odors neutralization and gases reduction emitted by industrials waste water streams, municipal pump stations, ponds, lagoons, etc. These formulas are surface actives where by the odors and gases are emitted neutralizing them at the wastewater's surface. Treatment by flotation to create an odors barrier.

SF-HPW, SF-HPW5S: Double function products. Treatment of bottom sludges and surface residues (oils, greases, fats, pulps, etc.) aiming at odors neutralization and gases emissions reduction. Products separate in the course of the process, a part comes up to  the surface and the other goes to the bottom.

SF-1263: Mostly aiming at ammoniac odors neutralization as well as ammonia gases emissions reduction. Treatment by floatation to create an odors barrier.

SF-WF5S: Mostly aiming at odors neutralization as well as hydrogen sulfide (H2S) reduction emitted by wastes oils and water emulsions. Have also the needed proprieties to reduce formaldehyde emissions generated by any sources.

SFA Plus-1204S: Mostly aiming at odors neutralization and gases emissions reduction such as NH3, H2S and mercaptans. This formula could be injected in the water coming from belt-press, sludges or any other specific injection point where malodorous and gases emissions are generated.

SF-WB, SF-WB5 (H2S): For treatment of « Bottom Sludges Only » in any waste water facilities or streams, ponds, lagoons. Those products settle down  to treat bottom sludge's for odors control.

SFA-1263: Mostly aiming at odors neutralization and gases reduction emitted by septic tanks.

SFA Plus-888 NF: Mostly aiming at odors neutralization and gases reduction emitted by Municipal or Industrial sludges or waste water.  Can also be use to treat odors from ponds, lagoons, stagnant water, septic tanks etc.